--- title: "Cantilever Rack in Tulsa, OK | Tulsa Pallet Rack" url: https://tulsapalletrack.com/products/cantilever-rack description: "Cantilever rack for lumber, pipe, and steel in Tulsa. Arm length and spacing sized to your bundles, single or double sided. Call (918) 296-8162." lang: en --- Image: Cantilever Rack warehouse storage project (https://tulsapalletrack.com/__l5e/assets-v1/bb7aa401-5f6e-494f-af05-f8987285ab48/cantilever-hero.jpg) # Cantilever Rack Systems in Tulsa, OK Cantilever rack exists because pallet rack has a front beam and long material doesn't care about pallets. Arms extend out from a column with no obstruction across the front, so lumber, pipe, tube, bar stock, sheet goods, and furniture load from the side and come off the same way, without lifting over anything. Choose it whenever product length, not weight or SKU count, is what's driving the storage problem - the alternative is usually leaning bundles against a wall or floor-stacking them where forklifts have to work around them. Arm length, capacity, and column spacing get set by the bundles you actually handle, not a generic length. We quote single-sided runs for a wall and double-sided runs for open floor, both with the layout attached so arm count and levels are settled before steel is ordered. (918) 296-8162 ## How Cantilever Rack Works 1 ### Columns and anchored bases Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick. 2 ### Arms at adjustable heights Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place. 3 ### Column spacing against sag Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly. 4 ### Single-sided or double-sided Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint. Image: Cantilever warehouse racking holding steel tubing (https://tulsapalletrack.com/__l5e/assets-v1/8ac068f4-27a8-434e-a6ad-25c8acd83746/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://tulsapalletrack.com/__l5e/assets-v1/87cd6b5e-5343-43c5-90fc-867164006a25/cantilever-3b.jpg) ## Why Tulsa Businesses Work With Us Tulsa warehouses handle a wide mix of energy-service parts, manufacturing material, distribution stock, and outbound orders. A rack choice needs to reflect that mix, not just the available floor area. Along I-44 and US-169, the useful question is how receiving, reserve storage, and picking will share the building. We compare cantilever rack with the alternatives using your actual storage requirements and a layout you can review before making a purchase. Through Warehouse Equipment & Supplies Co., you have one point of contact for design, quotation, and installation coordination. The recommendation explains where this system fits, where it introduces an access or rotation tradeoff, and which components belong in the proposed configuration. We put position counts, load considerations, and project inclusions in writing. For businesses near the Port of Catoosa or across the Tulsa metro, that makes it easier to compare options without mistaking a dense drawing for a workable storage plan. ## Where It Fits Best Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor ## What We Need to Design It - What are the dimensions of the product being stored, length included? - What's the typical weight per bundle? - Straight arms or inclined arms - do you need lips to hold round stock? - Single-sided along a wall, or double-sided in open floor? - What's the clear height and the reach of your handling equipment? ## What a Project Includes Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs. From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out. The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation partners anchor bases, plumb columns, brace the run, and set arm elevations to the drawing. The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy. Before the order is finalized, review the layout against the quoted components and confirm which storage requirements each section is intended to meet. Any change in pallet weight, product dimensions, lane use, or proposed beam elevations should be checked against the rated configuration rather than handled as an informal adjustment. The project documents provide a reference for future additions as inventory changes. 1 Phone consultation 2 CAD layout 3 Itemized quote 4 Delivery & installation ## Recent Installations A sample of racking projects completed across the region. Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://tulsapalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://tulsapalletrack.com/projects ## Get a Cantilever Rack Quote Send the basics and we will come back with a layout and pricing. Prefer to talk? Call (918) 296-8162. ### What's Included: - Free Design Consultation - CAD layout drawings - Itemized project quote - Rack type recommendations - Installation timeline ## Cantilever Rack Questions We Hear Most ### How is cantilever rack different from pallet rack? ### How far apart should the columns be? ### Straight arms or inclined arms? ### Can arms or levels be added later? ### Does cantilever rack need to be anchored to the floor? ### Can cantilever rack sit next to pallet rack in the same building? ## Cantilever Rack by Service Area Delivery and installation across the Tulsa metro and northeastern Oklahoma. Tulsa: https://tulsapalletrack.com/service-area/tulsa/cantilever-rack Broken Arrow: https://tulsapalletrack.com/service-area/broken-arrow/cantilever-rack Owasso: https://tulsapalletrack.com/service-area/owasso/cantilever-rack Bixby: https://tulsapalletrack.com/service-area/bixby/cantilever-rack Jenks: https://tulsapalletrack.com/service-area/jenks/cantilever-rack Sand Springs: https://tulsapalletrack.com/service-area/sand-springs/cantilever-rack Sapulpa: https://tulsapalletrack.com/service-area/sapulpa/cantilever-rack Catoosa: https://tulsapalletrack.com/service-area/catoosa/cantilever-rack Claremore: https://tulsapalletrack.com/service-area/claremore/cantilever-rack Muskogee: https://tulsapalletrack.com/service-area/muskogee/cantilever-rack Bartlesville: https://tulsapalletrack.com/service-area/bartlesville/cantilever-rack Coweta: https://tulsapalletrack.com/service-area/coweta/cantilever-rack Glenpool: https://tulsapalletrack.com/service-area/glenpool/cantilever-rack Pryor: https://tulsapalletrack.com/service-area/pryor/cantilever-rack Wagoner: https://tulsapalletrack.com/service-area/wagoner/cantilever-rack ## Other Rack Systems We Supply ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. https://tulsapalletrack.com/products/pallet-rack ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. https://tulsapalletrack.com/products/pushback-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. https://tulsapalletrack.com/products/carton-flow-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. https://tulsapalletrack.com/products/pallet-flow-rack ### Drive-In Rack Deep storage lanes for bulk inventory, with access aisles around the rack block. https://tulsapalletrack.com/products/drive-in-rack Planning a warehouse move? View Warehouse Relocation Services (https://tulsapalletrack.com/warehouse-relocation) ## Where We Work Located in Tulsa, we serve the entire Tulsa metro with industrial pallet racks and warehouse storage solutions. ### Tulsa Pallet Rack #### Address 3171 S 129th E Ave. Ste A #5316 Tulsa, OK 74134 #### Phone (918) 296-8162 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Ready to Price Cantilever Rack? Call (918) 296-8162 or request a quote and we will start a layout. (918) 296-8162 Tap to Call: (918) 296-8162 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://tulsapalletrack.com/#business", "name": "Tulsa Pallet Rack", "url": "https://tulsapalletrack.com", "telephone": "(918) 296-8162", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3171 S 129th E Ave. Ste A #5316", "addressLocality": "Tulsa", "addressRegion": "OK", "postalCode": "74134", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Tulsa+Pallet+Rack,+3171+S+129th+E+Ave.+Ste+A+%235316,+Tulsa,+OK+74134&z=15&output=embed", "areaServed": [ { "@type": "City", "name": "Tulsa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Broken Arrow", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Owasso", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Bixby", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Jenks", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Sand Springs", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Sapulpa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Catoosa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Claremore", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Muskogee", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Bartlesville", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Coweta", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Glenpool", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Pryor", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Wagoner", "containedInPlace": { "@type": "State", "name": "Oklahoma" } } ], "openingHoursSpecification": { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } }, { "@type": "Service", "@id": "https://tulsapalletrack.com/products/cantilever-rack#service", "name": "Cantilever Rack in Tulsa, OK", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "url": "https://tulsapalletrack.com/products/cantilever-rack", "provider": { "@id": "https://tulsapalletrack.com/#business" }, "areaServed": [ { "@type": "City", "name": "Tulsa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Broken Arrow", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Owasso", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Bixby", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Jenks", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Sand Springs", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Sapulpa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Catoosa", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Claremore", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Muskogee", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Bartlesville", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Coweta", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Glenpool", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Pryor", "containedInPlace": { "@type": "State", "name": "Oklahoma" } }, { "@type": "City", "name": "Wagoner", "containedInPlace": { "@type": "State", "name": "Oklahoma" } } ] } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://tulsapalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Products", "item": "https://tulsapalletrack.com/products" }, { "@type": "ListItem", "position": 3, "name": "Cantilever Rack", "item": "https://tulsapalletrack.com/products/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How is cantilever rack different from pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists." } }, { "@type": "Question", "name": "How far apart should the columns be?", "acceptedAnswer": { "@type": "Answer", "text": "Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing." } }, { "@type": "Question", "name": "Straight arms or inclined arms?", "acceptedAnswer": { "@type": "Answer", "text": "Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels." } }, { "@type": "Question", "name": "Can arms or levels be added later?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base." } }, { "@type": "Question", "name": "Does cantilever rack need to be anchored to the floor?", "acceptedAnswer": { "@type": "Answer", "text": "Yes - bases are anchored to the floor, and taller or double-sided runs get braced between columns. Anchors and bracing are priced into the quote rather than left for the installer to sort out on-site." } }, { "@type": "Question", "name": "Can cantilever rack sit next to pallet rack in the same building?", "acceptedAnswer": { "@type": "Answer", "text": "Routinely. It's common to run cantilever along one wall for long stock and selective or another pallet system through the rest of the building - we lay out both in the same drawing so aisle widths and clearances line up." } } ] } ] ```