Is selective pallet rack the same thing as pallet rack?

Almost always, yes. When someone asks for pallet racks with no other description, they mean selective: single-deep rows, an aisle on each side, direct access to every position. Pushback, drive-in, and pallet flow are higher-density alternatives you'd choose instead, not variations on the same system.

How many pallet positions will fit in my building?

It comes down to clear height, column spacing, and how much floor you're willing to give up to aisles. We model it in CAD and hand you the position count in writing, often with two aisle widths side by side so you can weigh density against how fast trucks can move.

Do I need wire decking on every level?

Not necessarily. Decking depends on what's sitting on the beams - cases, slip sheets, drums, and pallets with damaged stringers usually need it. Sound GMA pallets often bear directly on the beam face, and we spec it either way in the quote so there's no guesswork.

Can you match new rack to what we already have?

Usually. We identify manufacturer, connector style, and column profile from photos and measurements, then match or adapt so the new bays tie into your existing aisle pattern instead of standing apart from it.

How is load capacity determined?

Beam size and length, frame gauge, upright spacing, and level count all factor in. We size to your heaviest anticipated pallet with margin built in, then hand over ratings for the finished configuration so your team can post and train against real numbers.

When does it make sense to move past selective rack?

Once you're consistently carrying more than three or four pallets of the same SKU. At that point the aisle maintained for access costs you more in floor space than a denser system like pushback or drive-in would cost you in flexibility.

Pallet Rack Systems in Tulsa, OK

Selective pallet rack is single-deep steel: an aisle on each side, direct access to every pallet on the row. It's the system most warehouses run because it trades storage density for something more valuable once SKU counts climb - a driver never has to move one pallet to get at another.

It earns its keep when inventory is mixed, picking happens straight off the rack face, or you simply don't hold enough of any one item to justify a deeper system. The tradeoff is real: selective racking spends floor space on aisles that pushback or drive-in would give back to storage.

We size industrial pallet racks to your heaviest pallet, your lift truck's reach, and the clear height you're already leasing, then hand back a CAD layout with position counts and an itemized quote - so you know what you're buying before steel ships.

(918) 296-8162

How Pallet Rack Works

Frames and beams

Roll-formed or structural upright frames carry pairs of load beams across the aisle. Beam length, frame depth, and steel gauge follow your heaviest pallet, not a catalog default.

One position, one pallet

Each pallet sits on a beam level facing the aisle. Nothing gets moved to reach anything else, which is the entire point of paying for two aisles instead of one.

Beam elevations to the ceiling

Levels stack from the floor up to the first obstruction - light fixtures or ductwork, usually - so the design uses height you're already renting instead of leaving it empty.

Decking, guarding, protection

Wire decking, pallet supports, row spacers, column protectors, and end-of-aisle guarding get specified in the same layout instead of tacked on later as an afterthought.

Rows of industrial pallet racks loaded with pallets in a Tulsa warehouse

Selective pallet rack row fitted with wire decking on every level

Why Tulsa Businesses Work With Us

Tulsa warehouses handle a wide mix of energy-service parts, manufacturing material, distribution stock, and outbound orders. A rack choice needs to reflect that mix, not just the available floor area. Along I-44 and US-169, the useful question is how receiving, reserve storage, and picking will share the building. We compare pallet rack with the alternatives using your actual storage requirements and a layout you can review before making a purchase.

Through Warehouse Equipment & Supplies Co., you have one point of contact for design, quotation, and installation coordination. The recommendation explains where this system fits, where it introduces an access or rotation tradeoff, and which components belong in the proposed configuration. We put position counts, load considerations, and project inclusions in writing. For businesses near the Port of Catoosa or across the Tulsa metro, that makes it easier to compare options without mistaking a dense drawing for a workable storage plan.

Where It Fits Best

High SKU counts with few pallets behind each one

Order picking straight off the rack face

Mixed pallet sizes and irregular loads

Warehouses adding a second or third beam level for more cube

Operations that can't tolerate a position being buried behind another

What We Need to Design It

What's the clear ceiling height under lighting or other obstructions?
What are your pallet dimensions and your heaviest pallet weight?
What forklift are you running, and what's its maximum lift height?
How many positions do you need today, and at your peak?
How much floor can you give up to aisles versus storage?

What a Project Includes

The design starts with a conversation, pallet footprint and weight, forklift type and free lift, clear height, column spacing, aisle width, and turn rate. That's what sets beam capacity and how many levels the building will actually carry.

From there our design team draws pallet positions, beam elevations, and aisle centerlines in CAD, then prices every line so you see cost per pallet position instead of a lump sum. That number is what lets you compare selective against pushback or drive-in honestly - selective usually costs less per position to build but more per position in floor space.

Component availability and delivery arrangements are confirmed in the quote before an installation date is agreed. Installation partners anchor and plumb every frame, hang decking, and tag capacities on the finished rows.

What you're left with is racking that matches how the building runs, load-rating documentation your team can post, and one number to call when you're adding a row next spring.

Before the order is finalized, review the layout against the quoted components and confirm which storage requirements each section is intended to meet. Any change in pallet weight, product dimensions, lane use, or proposed beam elevations should be checked against the rated configuration rather than handled as an informal adjustment. The project documents provide a reference for future additions as inventory changes.

Phone consultation

CAD layout

Itemized quote

Delivery & installation