Can gravity lanes work in a low-clear Bixby flex building?

Possibly. We calculate the elevation difference across the full lane and compare the resulting storage levels with overhead obstructions and truck lift capability before recommending a configuration.

Should Memorial Drive wholesale stock all use FIFO?

No. Identify goods with aging limits and consistent pallet quantities first. Mixed slow movers may need selective positions, while interchangeable reserve loads could suit pushback.

Can our existing pallets run on the rollers?

Their dimensions alone do not settle it. Submit examples of each pallet construction, including worn pallets, so runner contact and movement under the expected weight range can be evaluated.

What should we provide for an installation proposal?

Include a measured plan, receiving windows, loaded heights, minimum and maximum weights, and available staging space. The proposal should distinguish equipment supply, scheduled crew work, and your preparation responsibilities.

Pallet Flow Rack warehouse storage system

Bixby, Oklahoma

Pallet Flow Rack in Bixby, OK

Pallet flow rack in Bixby gives wholesale operators a defined receiving end and a separate withdrawal face for stock that needs first-in, first-out handling. Instead of reaching past newer receipts, operators remove the oldest available pallet while gravity advances the remaining queue. The arrangement suits repeated full-pallet movements, provided each lane holds compatible loads and inventory is assigned deliberately.

Begin with your fastest moving consumer goods and any date-sensitive products, not the entire inventory list. A lane needs enough pallets of one SKU to justify its depth. Slow building-product lines and assorted service parts may remain better suited to individually accessible storage. We supply new material only and compare the storage options against your actual replenishment pattern.

(918) 296-8162

Fit pallet flow rack around the building first

A compact building does not automatically favor a deep block. Measure both working aisles, the complete lane length, and the height consumed by its slope before counting pallet positions. Pallet flow racking can concentrate reserve inventory, but the second operating face still needs enough room for the truck to square up and handle a full load.

In light assembly, replenishment quantities may differ from finished-goods shipping quantities. Separate these flows on the drawing rather than expecting one deep lane to serve unrelated products. We plan the storage footprint around actual movements and schedule installation crews around agreed access and material staging.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Bixby warehouse storage Pallet flow rack specifications Compare LIFO pushback Compare carton flow picking

Call (918) 296-8162

How gravity flow rack meters each pallet

Gravity rollers support the pallet as it travels down a controlled incline. Loading happens at the elevated rear end; picking happens at the lower opposite side. Brakes or speed controllers limit travel speed, while the discharge arrangement holds the next load as the front pallet is removed. Component selection depends on load weight and pallet contact surfaces.

Lane length and slope must be selected together. A steeper pitch is not a remedy for damaged runners, and a long lane cannot be specified from pallet count alone. Test representative light and heavy loads so movement, spacing, and discharge behavior are checked before routine use.

Pallet acceptance

Inspect bottom boards, runners, fasteners, and wrap tails before entry. Reject broken or distorted pallets from the flow lanes rather than relying on following loads to push them through.

Operating checks

Keep roller paths clear and establish an inspection routine for speed controllers and end stops. A stalled load calls for the agreed recovery procedure, not entry beneath stored pallets.

Clearance survey

Record column faces, door positions, usable lift height, and loaded pallet dimensions. Include wrapping that extends beyond the deck and any products projecting above the normal load.

Lane allocation

Reserve each lane for a defined SKU and rotation sequence. If receipts contain several production dates, document how operators will preserve their order during loading.

Choose pallet flow racking for repeatable rotation

FIFO matters most when stock age affects saleability or production use. Gravity flow rack keeps replenishment and picking physically apart, which can help a busy wholesale operation maintain a repeatable sequence. It does not replace lot records: inventory controls must still connect each receipt to the correct lane and withdrawal order.

Compare that requirement with LIFO pushback before choosing. Pushback loads and retrieves from one aisle, making it an alternative where same-SKU stock can leave in reverse arrival order. For high-volume, date-sensitive SKUs, opposite-side access may justify the additional aisle; for irregular quantities, shallower storage may avoid partly empty lanes.

Free Design Consultation

CAD layout with position counts

Installation coordinated with installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Along Memorial Drive and near 121st Street, the mix of flex space and older warehouse buildings makes usable geometry important. A wholesale distribution layout should account for columns, restricted overhead space, and forklift approaches before adding depth. For stock moving toward US-64 or US-75, receiving and outbound staging must remain usable on both sides of the storage block.

Building supplies

Service-parts storage

Regional distribution

Recent Installations

Racking projects completed for warehouses across the Tulsa metro and northeastern Oklahoma.

View More Projects

Map your receiving and withdrawal faces

Our business is a division of Warehouse Equipment & Supplies Co., supplying and installing storage systems since 1997. Send pallet weights, photographs, SKU quantities, and building measurements for a Bixby pallet flow rack review focused on new equipment and a managed installation scope. Call (918) 296-8162.