Is an older low-clearance building worth considering?

Yes, if the proposed levels leave room for the truck and the lifting movement. Fewer usable levels may be appropriate; column height alone does not establish accessible storage.

Can mixed metal lengths share one face?

They can when each length reaches enough correctly positioned supports. Short remnants may need their own location rather than being placed across whatever arms happen to be open.

What changes when the rack goes outdoors?

Exposure affects the finish, supporting surface and stored-material protection plan. Review anchorage and yard handling conditions as part of the installation rather than transferring an indoor arrangement unchanged.

Should we buy deeper arms for future inventory?

Not without checking the likely packages and the resulting structural demand. Extra reach changes leverage, and a future load may require different columns or bases as well as different arms.

Cantilever Rack warehouse storage system

Sand Springs, Oklahoma

Cantilever Rack in Sand Springs, OK

Cantilever rack in Sand Springs creates open access to long inventory by carrying loads on arms fixed to upright columns. There is no front obstruction between the operator and the stored bundle. The design is useful where bar, tube or pipe would otherwise compete with production for floor space.

Lumber, sheet goods and furniture can also use open-arm storage, provided their contact needs are addressed. A broad panel may require a supported deck, while a finished piece may need protection at each bearing point. Choose a cantilever storage rack by package behavior, not just by total weight.

We bring supplying and installing experience dating to 1997 as a division of Warehouse Equipment & Supplies Co. That experience informs the questions we ask about truck approach, material stiffness and the space available during assembly.

(918) 296-8162

Check working clearance before adding height

An older building can have enough nominal height for a column but too little room to raise a package above its arm. Measure usable clearance along the full row and the truck approach. Include the lift movement required to release and withdraw the longest load.

A conventional forklift needs an aisle that accounts for material extending sideways beyond its carriage. A side-loader may carry that length differently, but it still needs a verified approach and exit. Check turning points with a loaded envelope rather than an unloaded truck sketch.

Indoor cantilever rack should be positioned around handling space and existing workstations. Outdoor arrangements call for a suitable slab, defined anchoring and a finish selected for exposure. Rain protection for stored panels or finished items remains a separate decision from protecting the rack steel.

Choose single-sided runs for one-face operation and double-sided runs where both aisles can remain usable. A central row is not practical if one side is routinely filled with work in progress. Preserve an identified location for receiving and partly picked bundles during busy periods.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Sand Springs warehouse storage Cantilever rack specifications Compare FIFO pallet flow Compare drive-in reserve

Call (918) 296-8162

Why cantilever racking suits a changing stock mix

Long items are easier to separate by size when each group has assigned supports instead of sharing a floor pile. Open access also avoids asking an operator to guide a lengthy bundle between front posts. The benefit depends on keeping each load within its intended bearing arrangement.

Cantilever racking suits material selected by length, shape or individual package. Selective pallet rack is usually the starting point for conventional palletized products requiring beam positions. A steel service area and a carton warehouse may need both, with a clear handoff between their handling routes.

Available floor area does not determine capacity. Before increasing storage levels, check cumulative column loading and the base arrangement. Changing the assortment can be just as significant as adding weight if shorter pieces no longer bridge the intended supports.

Free Design Consultation

CAD layout with position counts

Installation coordinated with installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

In the Sheffield Steel area and Adams Road industrial corridor, steel service work can require layouts within older 18-24 ft clear manufacturing and warehouse buildings. Connections toward US-412 / SH-97 should inform receiving flow, while actual roof clearance and door positions establish workable arm elevations and row orientation.

Metal fabrication

Tubing and steel supply

Manufacturing support

Specify cantilever rack support without guesswork

Use actual bundle records and measurements to describe the storage duty. Record how the load changes after picking as well as its condition on arrival; partially used stock still needs a deliberate home.

Arm dimensions

The bundle depth establishes required arm reach, while the supported weight establishes capacity. Check the distribution across engaged arms instead of assuming every package shares its weight evenly.

Support intervals

Space upright columns to limit sag for the material being stored. Review short lengths, flexible sections and end projections before fixing the final row geometry.

Arm profile

Straight arms can serve stable flat bundles, whereas inclined arms with lips help contain round pieces. Use suitable packaging and handling practices alongside the selected profile.

Floor connection

Anchor the bases using the connection specified for the row and a suitable concrete surface. Inspect floor conditions before installation so damaged areas do not become a last-minute discovery.

Recent Installations

Racking projects completed for warehouses across the Tulsa metro and northeastern Oklahoma.

View More Projects

Plan Sand Springs cantilever rack with us

Send photographs of the building interior with a dimensioned sketch and the dimensions and weights of representative bundles. For a Sand Springs cantilever rack layout, identify low roof areas, door restrictions and the truck used for retrieval. We can then discuss support geometry and assembly staging in terms of the available working space. Select cantilever rack elevations that operators can actually service. Call (918) 296-8162.