Can furniture and building materials use the same row?

Yes, if the support surfaces and load assignments suit both products. Finished furniture may need protection or decking that is unnecessary for a strapped lumber package.

How do we decide between one face and two?

Choose according to available working aisles and handling flow. A two-face row requires usable access on both sides; it is not simply twice the storage inside the same operating footprint.

Can we place heavier bundles on lower levels?

Only within the approved loading arrangement for the entire structure. A low position does not remove arm, column, base or anchorage limits.

What should an existing-rack expansion review include?

Identify the original components and obtain their ratings and loading arrangement. New arms or extra levels must be checked for compatibility and cumulative demand before any purchase decision.

Cantilever Rack warehouse storage system

Sapulpa, Oklahoma

Cantilever Rack in Sapulpa, OK

Cantilever rack in Sapulpa gives bulky inventory an open loading face rather than a series of front-post openings. Projecting arms attach to upright columns and carry material at selected elevations. Operators can approach a long package across its length, provided the truck aisle and support positions are planned together.

Consider bar, pipe, tube and lumber first, then look at the particular needs of sheet goods or furniture. Surface protection, support area and package stability can matter as much as gross weight. A cantilever storage rack works best when its specification describes the goods that will actually touch it.

As part of a division of Warehouse Equipment & Supplies Co., our operation has been supplying and installing since 1997. We discuss storage geometry and the work of installation together, so the proposed layout includes more than a count of steel components.

(918) 296-8162

Use cantilever rack where pallets fall short

Cantilever racking addresses packages whose length or shape makes ordinary pallet positions awkward. It can separate long sizes without requiring repeated removal of floor-stacked material. Selective pallet rack is still appropriate for standard palletized inventory, especially where cartons move as complete unit loads.

A single-sided layout offers storage accessed from one working aisle. Double-sided rows present two storage faces, but only make sense with room to work on both. Evaluate the travel and staging area around each alternative before deciding which offers more useful storage.

Do not let an open loading face become an invitation to put any item anywhere. Assign locations by length and load requirement, then identify those locations clearly. This helps returned partial bundles find supports suited to them rather than an empty level chosen at random.

Free Design Consultation

CAD layout with position counts

Installation coordinated with installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

For auto aftermarket and building supply distribution in the Sapulpa industrial park or the South Frankoma wholesale building, organize long-stock rows around receiving and order assembly. I-44 / Turner Turnpike connections may shape inbound movement, but the facility sketch must show where trucks unload and bundles wait before storage.

Glass and packaging supply

Manufacturing material

Regional freight stock

Make loading access part of the plan

A forklift carrying building materials needs space for the package as well as the machine. Check door entries, crossings and the final turn toward the arms. If a side-loader is proposed, verify its handling envelope using the actual model and planned load lengths.

For indoor use, include the clearance needed to lift above an arm before pulling away. Outdoor use requires a finish suited to exposure, a supporting surface suitable for anchorage and consideration of the stored goods. A weather-exposed rack does not provide weather protection for its contents.

Keep assembly staging distinct from daily dispatch. Mark where rack components can be unloaded and where displaced inventory will remain accessible. Non-air-conditioned buildings bring summer heat into the work plan, while spring hail or winter ice can force changes to an outdoor installation sequence.

The completed layout should show more than rows and aisles. Include the place where straps are removed, partly used packages are regrouped and outgoing orders wait. These tasks consume real space even though they do not appear in a rack capacity schedule.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Sapulpa warehouse storage Cantilever rack specifications Compare FIFO pallet flow Compare drive-in reserve

Call (918) 296-8162

Four checks for cantilever racking selection

Start with measurements from the largest and least stable loads, then check the lighter short lengths too. The selected arrangement must support ordinary picking conditions, not only neat full bundles at receiving.

Bundle depth

Set arm projection to carry the actual depth of the package. Select capacity from the maximum weight assigned to each arm, with the loading distribution reviewed rather than presumed equal.

Material stiffness

Column spacing needs to keep sag within the acceptable support arrangement for the product. Flexible lengths and short leftovers can require closer or differently positioned bearing points.

Containment choice

Stable flat stock may use straight arms; round stock often calls for inclined arms with lips. Retention features complement appropriate bundling rather than replacing it.

Base and slab

Provide anchored bases matched to the complete loading plan and concrete conditions. Arm ratings do not independently establish how much the columns, bases and connections can carry together.

Recent Installations

Racking projects completed for warehouses across the Tulsa metro and northeastern Oklahoma.

View More Projects

Plan Sapulpa cantilever rack with us

To discuss a Sapulpa cantilever rack arrangement, send a floor sketch and a load list that includes package depth, length and maximum weight. Add photographs of the access route and any proposed outdoor area. Tell us how orders are picked so support locations and installation scope reflect daily use. Recheck cantilever rack loading before changing the assigned package sizes. Use cantilever racking locations that suit both replenishment and partial picking. Call (918) 296-8162.