Can we keep loading freight during a Catoosa move?

Possibly, if the work can be separated from active freight handling and enough staging room remains. Identify required docks, travel routes and loading windows before the equipment sequence is agreed.

Does your crew clear pallets before dismantling?

Inventory removal should be arranged by your operation unless it is specifically included in the agreed scope. Each released section needs clear storage positions and access before the rack crew starts taking components apart.

Can added rack provide storage before existing rows arrive?

Yes, an initial installation may provide receiving space when the building and material plan allow it. Review the needed storage positions and loads first so the added equipment supports the transition and the final layout.

What determines whether old components can be reused?

Condition, component identification, connection compatibility and the proposed storage configuration all matter. Provide available labels and load information, and expect questionable pieces to be separated for review rather than automatically rebuilt.

Warehouse Relocation warehouse storage system

Catoosa, Oklahoma

Warehouse Relocation Services in Catoosa, OK

A warehouse relocation in Catoosa works best when the receiving building is treated as a new storage layout, not a copy of the old one. We review existing rack, establish which components belong in the destination and coordinate the work around inventory access. That preparation makes the transfer sequence clear before dismantling begins.

Tulsa Pallet Rack, a division of Warehouse Equipment & Supplies Co., has been supplying and installing since 1997. Our rack relocation planning connects teardown and transport with the rows that need to be rebuilt first. We also account for damaged components and additional rack so missing material does not become an unanswered question during assembly.

(918) 296-8162

Warehouse relocation around the receiving floor

Begin with the destination's usable dimensions, not its total floor area alone. Doors, columns, handling aisles and required work zones determine where storage can function. Draw the rack arrangement with those features in view before deciding how many existing bays should make the trip.

Review pallet weights, dimensions and intended beam levels alongside the equipment inventory. A changed product mix can alter what the rack needs to carry. Existing components should be evaluated for the proposed arrangement rather than accepted solely because they were in service before.

Where port-related freight uses separate staging areas, keep rack bundles out of those spaces unless the move plan specifically reserves them. Operations connected with the McClellan-Kerr navigation system may have their own material-handling commitments; the equipment move should work around the confirmed receiving schedule.

Allow for weather-related adjustments in crew and truck coordination. Hot, humid summer work in non-air-conditioned buildings calls for sensible staging and work pacing, while spring severe weather or winter ice may change access. Agree on how schedule changes will be communicated between both locations.

Businesses moving into a different warehouse

Rack systems that can be reused in a new layout

Operations combining storage from multiple buildings

Facilities adding new rack alongside relocated material

Catoosa warehouse storage Warehouse relocation services New pushback rack for the next building New pallet flow rack for the next building

Call (918) 296-8162

Pallet rack relocation in defined packages

A single move can involve several release points instead of one building-wide handover. These packages are arranged around your operating needs, with clear inventory and access requirements for each phase. Their timing is established after the layout and material review.

Draw the storage destination

Measure available rack, gather component information and compare it with the receiving building. Lay out planned rows and assign material to them. Identify added bays and replacement pieces before confirming which inventory blocks can move together.

Remove emptied rack sections

Dismantle only the areas released by your inventory team. Inspect frames, beams and accessories as they come apart, preserving identification where available. Separate questionable material from reusable stock and report shortages against the planned installation requirements.

Build the receiving rows

Reinstall delivered material to the destination drawing with the specified connection hardware and accessories. Review the assembled configuration before handing the area back for storage. Address missing or unsuitable components before that section is placed into use.

Transfer organized component loads

Bundle and label steel according to the receiving phase, then coordinate loading and unloading space at both addresses. Arrange the shipment so needed material is accessible on arrival. Keep destination identifiers with the components through each handling step.

Rack relocation that supports ongoing work

An equipment move should not rely on the warehouse finding empty space overnight. Establish temporary inventory locations and a clear handoff process for each rack block. Where room allows, complete an initial destination section before releasing the next group of storage positions at the original facility.

Adding new material can help bridge that transition, but it needs the same review as reused rack. Confirm connection systems, dimensions and intended loads before selecting additions. We distinguish between separate new rows and components proposed for use within existing assemblies, because those are different equipment decisions.

Free Design Consultation

CAD layout with position counts

Installation coordinated with installation partners

Warehouse storage layout with pallet rack

Operations We Rack Around Here

At the Tulsa Port of Catoosa and across the Rogers County industrial area near I-44/SH-66, energy equipment and metal fabrication operations need rack moves coordinated with active loading and material staging.

Port-related distribution

Steel and fabrication material

Industrial packaging

Recent Installations

Racking projects completed for warehouses across the Tulsa metro and northeastern Oklahoma.

View More Projects

Review your Catoosa equipment move

Bring both addresses, rack photos, a component count and any destination floor drawing. Explain loading restrictions, inventory-clearance responsibilities and the areas that must remain active. Call (918) 296-8162 to discuss warehouse relocation planning, dismantling, transport and rebuilding. Call (918) 296-8162.